Highest H.P. forced induction k?

[nos51]

maybe this can turn into a sticky
i havent been around in a while since i sold my teg k turbo and got my evo,so i was wondering what kind of #s are the k's laying down now.lets make a list.post your setup,motor,turbo,if its a stock block or built and times if you got any.i would love to see whats out there!!heres my old setup to start.

k20a2,stock longblock,t3 sc6176e,sidewinder manifold,585hp,410 torque.best time 11.2@136

1] Chris from Houston,
2002 acura rsx type-s

793whp on C16,pt67 bb


2] hybrid hatch,
k20a2 sleeved,built, 776hp,492torque,gt4294r

3]nos51:
k20a2 STOCK sleeves,je pistons 20" over,eagle rods,stock ported a2 head,ferera dual springs,ips kt1 cams
afi intake manifold,gt4094r 1.06 backhousing, e-85
745hp,503tq 32 psi

4]boostedgsr-si
stock k24 bottom,k20 head,gt35r
654hp@26psi

[archull]

Chris from Houston,
2002 acura rsx type-s

793whp on C16

The car also makes over 600whp on E85 as his daily driver

The engine has 11.5:1 pistons, sleeved and good rods. The head was cleaned up with 110lb seat pressure valvesprings, and stock cams.

Now for the fun part..

With the help of Stan @ Fast-Turbo.com they put together a dual Bosch pump fuel system, 1600cc injectors with an FJO injector driver.
Full Race exhaust manifold
Precision PT67 P Trim ball bearing turbo .81 A/R
3.5" DP
Tial 44mm wastegate
Custom intercooler piping was built by Fernando @ st00pidfast
Baller Ass Wiggins couplers
Hondata Kpro
5 bar MAP sensor
Racepak dash


A couple of the videos of the car on the Dyno:

http://www.youtube.com/watch?v=GE3UHwiMXR4

http://www.youtube.com/watch?v=rlSyOXnRIZk

[Capsoval]

VW Paradise made around 1400hp on a k24

[NJslvrtypes]

Got a Full Race Twin Scroll Setup, custom ic, twin boch's and a 1.06 GT4094R. Goes on the dyno this Saturday, should easily make 800+

[Hybrid_hatch]

793 on a PT67? most I have ever seen/got from a PT67 is 640 or so and that was with a bigger A/R exhaust side to support it.

now for my heap.

K20A2
GE sleeved
CP 9.0-1 pistons
Scat rods
AFI sidewinder mani
3 inch DP
GT4294R
AEM EMS
1600cc injectors
Full fuel system
springs/retainers/valves
776 whp and 492 wht

[nos51]

wow really nice #s guys.that is the most hp i have seen on a pt-67.

keep them coming!!

[archull]

Originally Posted by Hybrid_hatch

793 on a PT67? most I have ever seen/got from a PT67 is 640 or so and that was with a bigger A/R exhaust side to support it.

he was running a T4/T67, full-race T4 sidemount manifold, 3.5" dp, etc.

But I agree, its the most power I have seen come from a T67 up to date (and this was still with stock cams)

His new setup is on its way, he is trying to break into the 1000HP range. He has re-built his motor again, fried one piston. He is going with a new custom Endyne head, new cams, much bigger turbo, he is lowering the compression to 9:1 (maybe the reason he was getting so much power out of the t67 was the high compression), he may also be using a 100-200 shot of N2o in the mix to help spool up that Giant turbo he is getting.

His car has been in the shop getting a custom cage, new motor, basically rebuilding the car from top to bottom

Originally Posted by nos51

wow really nice #s guys.that is the most hp i have seen on a pt-67.

keep them coming!!

yeah, I know, I said the same thing

[vtecspeed1320]

the only thing with a turbo is, once it hits its effeciency range it wont make any more power than any others, just because one motor is 9:1 and the other is 10.5:1 doesnt mean the higher c/r will make more power, just means it will have a wider powerband.

dont forget onyx and his 654whp at 34psi stock k24/k20a2 with gt35r and one-fag manifold.

[qwk]

keep an eye out on this guy's build. evans-tuning will be tuning this weekend. im hoping he will hit his goal (800+whp) after all the things he went through.

http://forums.clubrsx.com/showthread.php?t=491360

[vtecspeed1320]

^^^ good stuff, ive got some stuff brewing too give me a little while.

[k20turbo]

I made 604whp on 23psi then ran out of fuel again..... Another bosch and new turbo set up is the works though

[boostedGSR-Si]

i made 654whp @ 26psi

chris rsx is sitting at his house and hasnt touched it yet, i will go to his house one of these days and snap some shots of his rsx which has a custom cage with kevlar buckets and his bigg a turbo

[turbo-k]

Originally Posted by boostedGSR-Si

i made 654whp @ 26psi

chris rsx is sitting at his house and hasnt touched it yet, i will go to his house one of these days and snap some shots of his rsx which has a custom cage with kevlar buckets and his bigg a turbo

im in for some pics......

[archull]

Originally Posted by turbo-k

im in for some pics......

Better yet, I will post a vid of his, lol

http://videos.streetfire.net/video/f...ccdab95e41.htm

[boostedGSR-Si]

Originally Posted by archull

Better yet, I will post a vid of his, lol

http://videos.streetfire.net/video/f...ccdab95e41.htm

thanks, im bout to post 2 more

[boostedGSR-Si]

[quote=boostedGSR-Si;330338]thanks, heres 2 more at same power level

Onix vs Joe
Dr Joe's Porche GT2 (stage 2) Vs Onix's K20/24 Turbo Hatch------Camera car-E46 M3

[boostedGSR-Si]

i think my friend is gonna have the highest street driven boosted rsx after he installs these babies and thats just one of his smallest turbos he has laying around, the turbo he is using is one of a kind custom turbo that noone has, he is the only one with it and manifold is not IPS, trust me. i got more pics but dont want to post it, i took these pics last night






i was gonna take pics of car but theres shit everywhere and windows dusty and couldnt open door because i didnt want to move shit around

and dont ask about the blk dots, its nunya

[RSX King]

Wow, I can hardly wait to see that project come together ....

[guu-sama]

Originally Posted by boostedGSR-Si

and dont ask about the blk dots, its nunya

So, what are the black dots for??

[boostedGSR-Si]

Originally Posted by guu-sama

So, what are the black dots for??

they are mspaint speed holes from outerspace