***IPS Limited Edition K2 Stroker Cams*** - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum

HondaFreak · 03-23-2009, 10:22 PM

***SOLD***

OK. It's finally time for me to part with these. Due to a recent motor catastrophe and my lack of funds I am putting up my Limited Edition K2 Stroker Cams. As far as I know, there was only 2 sets of these cams produced. These are a great street all motor cam. I made 250+ on these cams with a stock tsx bottom end and TWM ITBS. So, if you are looking for a great daily driver cam shoot me a pm. I am asking SOLD

Also check out my other post.
http://www.k20a.org/forum/showthread.php?t=57247

jdmek910 · 03-24-2009, 03:42 PM

these arent from the 8620 batch are they? pm me the specs

**CJM** · 03-24-2009, 09:03 PM

bump for these, I had a set

HondaFreak · 03-24-2009, 11:43 PM

Added dyno graph of these cams to the original post.

Quote:

Originally Posted by jdmek910

these arent from the 8620 batch are they? pm me the specs

No these are not 8620. Once i find the spec sheet I will get you the numbers. I can tell you they share the same vtec lobes as the K2's, but the non-vtec lobes is where they differ.

Quote:

Originally Posted by CJM

bump for these, I had a set

Did you ever dyno yours? What kind of power did you make.

HondaFreak · 03-26-2009, 02:34 AM

Anyone that is interest in both the cams and our DTR/SSR header we can do a package deal of $1600 shipped for both.

Updated first post

HondaFreak · 03-26-2009, 10:27 PM

HondaFreak · 03-27-2009, 10:54 PM

blue2000em1 · 03-28-2009, 12:47 AM

Interesting.

IntegraDA05 · 03-28-2009, 11:28 AM

Quote:

Originally Posted by HondaFreak

Anyone that is interest in both the cams and our DTR/SSR header we can do a package deal of $1600 shipped for both.

Updated first post

Awesome Deal!
Would it be possibleif you could post a build spec sheet?

HondaFreak · 03-28-2009, 03:01 PM

Quote:

Originally Posted by IntegraDA05

Awesome Deal!
Would it be possibleif you could post a build spec sheet?

Are you talking about the build that made 250 with these. Here is our post about it from a couple years ago http://k20a.org/forum/showthread.php?t=13781

**CJM** · 03-28-2009, 03:24 PM

Quote:

Originally Posted by HondaFreak

Did you ever dyno yours? What kind of power did you make.

nope I never used 'em. I bought 'em from Dennis (squarepants). He told me Loan used them in her car in like the 2006 season... car made a lotta power. Ron told me with a 101.6 stroker kit, with these cams, you could run full 50 degree vtc. These things make power for sure in k24/k20 combo motors

HondaFreak · 03-29-2009, 02:54 AM

Quote:

Originally Posted by CJM

nope I never used 'em. I bought 'em from Dennis (squarepants). He told me Loan used them in her car in like the 2006 season... car made a lotta power. Ron told me with a 101.6 stroker kit, with these cams, you could run full 50 degree vtc. These things make power for sure in k24/k20 combo motors

I never knew she actually ran them, and that is good info about them making power with the bigger stroke.

HondaFreak · 04-03-2009, 12:56 AM

lhmoobvaj · 04-09-2009, 03:03 PM

Shoot me a picture of the header and what condition it's in. I'm interested.

HondaFreak · 04-10-2009, 03:24 AM

Quote:

Originally Posted by lhmoobvaj

Shoot me a picture of the header and what condition it's in. I'm interested.

pm'd

HondaFreak · 04-11-2009, 03:06 PM

Sold to lhmoobvaj.

lhmoobvaj · 04-18-2009, 07:45 AM

Thanks a lot for the header and cams. I will enjoy these parts.

**Ralph** · 04-18-2009, 04:38 PM

so would these cams be considered KME's, i know they're sold. just wondering.

03-23-2009, 10:22 PM	#1
HondaFreak K20a.org Basic User Join Date: May 2005 Location: WA Posts: 318	*IPS Limited Edition K2 Stroker Cams* *SOLD* OK. It's finally time for me to part with these. Due to a recent motor catastrophe and my lack of funds I am putting up my Limited Edition K2 Stroker Cams. As far as I know, there was only 2 sets of these cams produced. These are a great street all motor cam. I made 250+ on these cams with a stock tsx bottom end and TWM ITBS. So, if you are looking for a great daily driver cam shoot me a pm. I am asking SOLD Also check out my other post. http://www.k20a.org/forum/showthread.php?t=57247 __________________ 335whp 230wtq 10.79 @ 127 Speedfactory Racing \| ASP \| SSR \| Bullhead Gears \| Drag Cartel \| Kinsler

03-24-2009, 03:42 PM	#2
jdmek910 K20a.org Basic User Join Date: Jun 2005 Posts: 228	Re: *IPS Limited Edition K2 Stroker Cams* these arent from the 8620 batch are they? pm me the specs

03-26-2009, 02:34 AM	#5
HondaFreak K20a.org Basic User Join Date: May 2005 Location: WA Posts: 318	Re: *IPS Limited Edition K2 Stroker Cams* Anyone that is interest in both the cams and our DTR/SSR header we can do a package deal of $1600 shipped for both. Updated first post __________________ 335whp 230wtq 10.79 @ 127 Speedfactory Racing \| ASP \| SSR \| Bullhead Gears \| Drag Cartel \| Kinsler

03-26-2009, 10:27 PM	#6
HondaFreak K20a.org Basic User Join Date: May 2005 Location: WA Posts: 318	Re: *IPS Limited Edition K2 Stroker Cams* bump __________________ 335whp 230wtq 10.79 @ 127 Speedfactory Racing \| ASP \| SSR \| Bullhead Gears \| Drag Cartel \| Kinsler

03-27-2009, 10:54 PM	#7
HondaFreak K20a.org Basic User Join Date: May 2005 Location: WA Posts: 318	Re: *IPS Limited Edition K2 Stroker Cams* up __________________ 335whp 230wtq 10.79 @ 127 Speedfactory Racing \| ASP \| SSR \| Bullhead Gears \| Drag Cartel \| Kinsler

03-28-2009, 12:47 AM	#8
blue2000em1 K20a.org Master User Join Date: Dec 2007 Posts: 1,614	Re: *IPS Limited Edition K2 Stroker Cams* Interesting. __________________ Ever wonder why I'am such a fan of BASF Paints??Watch this video.http://www.youtube.com/watch?v=_DE6LulDKzo

04-03-2009, 12:56 AM	#13
HondaFreak K20a.org Basic User Join Date: May 2005 Location: WA Posts: 318	Re: *IPS Limited Edition K2 Stroker Cams* bump __________________ 335whp 230wtq 10.79 @ 127 Speedfactory Racing \| ASP \| SSR \| Bullhead Gears \| Drag Cartel \| Kinsler

04-09-2009, 03:03 PM	#14
lhmoobvaj New Member Join Date: May 2006 Location: Minnesota Posts: 99	Re: *IPS Limited Edition K2 Stroker Cams* Shoot me a picture of the header and what condition it's in. I'm interested.

04-11-2009, 03:06 PM	#16
HondaFreak K20a.org Basic User Join Date: May 2005 Location: WA Posts: 318	Re: *IPS Limited Edition K2 Stroker Cams* Sold to lhmoobvaj. __________________ 335whp 230wtq 10.79 @ 127 Speedfactory Racing \| ASP \| SSR \| Bullhead Gears \| Drag Cartel \| Kinsler

04-18-2009, 07:45 AM	#17
lhmoobvaj New Member Join Date: May 2006 Location: Minnesota Posts: 99	Re: *IPS Limited Edition K2 Stroker Cams* Thanks a lot for the header and cams. I will enjoy these parts. __________________ "With great power comes great responsibility"

04-18-2009, 04:38 PM	#18
Ralph K20a.org Supporter Join Date: Apr 2005 Location: South Florida Posts: 1,116	Re: *IPS Limited Edition K2 Stroker Cams* so would these cams be considered KME's, i know they're sold. just wondering. __________________ VOUCHES: Nikos, TypeK20A, EKBoosted, KB58, Drtye, Em2typeflex, CarNut4Eva, CivicMotorHead, Sharper